Specifications
|
Visonic Product No.: |
SecureLinc Care 1 w/MCT201WP |
Dimensions: |
10 13/16" x 8" x 2 1/8" (275mm x 203mm x 55mm) |
Weight: |
2.2 pounds (990g) without batteries |
Zones: |
28 wireless, 2 hardwired |
Hardwired Zone Requirements: |
2.2 k. E.O.L. resistance (max. resistance of wires 220) |
Zone Types: |
Interior follower, perimeter, perimeter follower, delay 1, delay 2, 24h silent, 24h audible, fire, non-alarm, emergency, gas and flood |
User Codes: |
8 codes, 4 digits each |
Control Facilities: |
Integral keypad, PowerCode hand-held transmitters, wireless commander, MCM-140+, remote telephone, local or remote computer |
Display: |
Single line, back lighted 16-character LCD and 4 LED indicators |
Arming Modes: |
AWAY, HOME, AWAY-INSTANT, HOMEINSTANT, LATCHKEY, FORCED, BYPASS |
Alarm Types: |
Silent alarm, siren alarm or sounder (internal) alarm, in accordance with zone attributes |
Siren Signals: |
Continuous (intrusion / 24 hours / panic); triple pulse - pause - triple pulse (fire) |
Siren Timeout: |
Programmable (4 min. by default) |
Internal Sounder Output: |
At least 85 dBA at 10 ft. (3m) |
Supervision: |
Programmable time frame for inactivity alert |
Data Retrieval: |
Status, alarm memory, trouble, event log |
Operating Frequencies: |
315 MHz (in USA & Canada) or other UHF channels per local requirement in the country of use |
Receiver Type: |
Super-heterodyne, fixed frequency |
Receiver Range: |
600 ft. (180m) in open space |
Antenna Type: |
Spatial diversity |
Coding: |
PowerCode and/or CodeSecure™ |
Power Supply: |
Plug-in transformer 120 VAC, 60 Hz / 9 VAC, 1A (in the U.S.A.); 230 VAC, 50 Hz / 9 VAC, 1A |
Current Drain: |
Approx. 65 mA standby, 800 mA at full load and in alarm |
Site External Siren Current (EXT): |
450 mA max @ 10.5 VDC when powered by AC & DC (battery) |
Site Internal Siren Current (INT): |
450 mA max. @ 10.5 VDC when powered by AC & DC (battery) |
PGM Output Current: |
100 mA max. |
Detector 1 & 2 Total (Sum) Current: |
100 mA max. |
High Current / Short Circuit Protection: |
All outputs are protected (current limited) |
Battery Test: |
Once every 10 seconds |
Built-in Modem: |
300 baud, Bell 103 protocol |
Data Transfer to Local Computer: |
Via RS232 serial port |
Report Destinations: |
2 central stations, 4 private telephones, 1 pager |
Reporting Format Options: |
SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2 1800/2300 Hz, Contact ID, Scancom |
Pulse Rate: |
10, 20, 33 and 40 pps - programmable |
Message to Private Phones: |
Tone or voice |
Message to Pager: |
PIN No. Alarm Type, Zone No. |
Operating Temperature Range: |
32°F to 120°F (0°C to 49°C) |
Storage Temperature Range: |
-4°F to 140°F (-20°C to 60°C) |
Humidity: |
85% relative humidity, @ 30°C (86°F) |
Approvals: |
FCC compliant |
Warranty: |
1 year, limited |