|
General |
|
Brand: |
INSTEON |
|
Manufacturer Product No.: |
2474DWH, SwitchLinc 2-Wire Dimmer - INSTEON Remote Control Dimmer (RF) |
|
UPC: |
White - 2474DWH: 813922010817
Almond - 2474DAL: 813922013306
Light Almond - 2474DLAL: 813922013351
Black - 2474DBK: 813922013313
Gray - 2474DGY: 813922013337
Ivory - 2474DIV: 813922013344
Brown - 2474DBR: 813922013320 |
|
Warranty: |
2 years, limited |
|
INSTEON |
|
INSTEON Powerline Mesh Rrepeater: |
No |
|
INSTEON RF Mesh Repeater |
Yes |
|
INSTEON Controller |
Yes |
|
INSTEON Responder |
Yes |
|
Maximum Links / Scenes |
400 |
|
Load Brightness Levels |
32 locally (256 with software) |
|
LED: |
White when load is on, bottom white LED is on when load is off.
Blinks red when responder does not acknowledge (can be disabled via software).
Blinks red or green during setup. |
|
LED Brightness: |
Adjustable, from off to bright |
|
Local On-level: |
Adjustable, 32 fixed brightness levels or resume dim |
|
Local Ramp-rate: |
Adjustable from 0.1 seconds to 9 seconds locally (0.1 seconds to 8 minutes via software) |
|
Local Control: |
Yes |
|
Commands supported as controller: |
On |
Off |
|
Fast-on |
Fast-off |
|
Begin bright |
Begin dim |
|
End bright |
End dim |
|
Software configurable: |
Yes |
|
RF Range: |
Up to 100-feet open air |
|
Phase bridge detect beacon |
No, INSTEON RF only device |
|
INSTEON Device Category: |
0x01 dimmable lighting control |
|
INSTEON device subcategory: |
0x24 |
|
Mechanical |
|
Mounting: |
Single gang electrical box |
|
Wires: |
Black - line (16 gauge) |
|
Red - load (16 gauge) |
|
Copper - ground (16 gauge) |
|
Color: |
White paddle (color change kits available), clear back case |
|
Set Button: |
1, clear |
|
Air Gap: |
Yes (Set button pulled out) |
|
Plastic: |
UV stabalized polycarbonate |
|
Beeper: |
Yes |
|
Beep on Button Press: |
Optional (off by default) |
|
LEDs: |
9 white brightness LEDs, 1 green/red status LED |
|
Dimensions: |
4.1" H x 1.8" W x 1.2" D |
|
Weight: |
3.6oz |
|
Operating Environment: |
Indoors |
|
Operating Temperature Range: |
32° to 104° F (0° to 40° C) |
|
Operating Humidity Range: |
0-90% relative humidity |
|
Storage Temperature Range: |
-4° to 158° F (-20° to 70° C) |
|
Electrical |
|
Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, split single phase |
|
Frequency: |
60Hz |
|
Load Type(s): |
Wired-in incandescent lighting |
|
Maximum Load: |
600 Watts |
|
Minimum Load: |
25 Watts |
|
User Replaceable Fuse |
No |
|
Hardwired Remote Control |
No |
|
Retails All Settings Without Power: |
Yes, saved in non-volatile EEPROM |
|
Standby Power Consumption: |
<1 Watt |
|
FCC ID: |
SBP2474DWH |
|
Safety Approval(s): |
ETL (Intertek Testing Services) |
|
Certifications: |
FCC, IC Canada |
|
X10 |
|
No X10 Support: INSTEON RF-only product |
