|
General |
|
Brand: |
INSTEON |
|
Manufacturer Product No.: |
2477DH, INSTEON SwitchLinc Dimmer (Dual-Band), High Wattage |
|
UPC: |
White - 2477DH: 813922011005
Almond - 2477DHAL: 813922011012
Ivory - 2477DHIV: 813922011029 |
|
Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
|
Warranty: |
2 years, limited |
|
Operation |
|
On-Levels: |
32 locally, increments of 1% with software |
|
Ramp Rates (full-ON to full-OFF): |
0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely |
|
LED Indicator: |
9 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit |
|
Operation Modes: |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
|
Combo Mode Message Order: |
INSTEON, INSTEON cleanup, X10 |
|
Multi-Way Circuit Support: |
One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers |
|
Setup Memory: |
Non-volatile EEPROM |
|
INSTEON Features |
|
INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
|
INSTEON Links: |
417 |
|
INSTEON Powerline Frequency: |
131.65 KHz |
|
INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
INSTEON Minimum Receive Level: |
10 mV |
|
INSTEON Messages Repeated: |
Yes |
|
Radio Frequency: |
915 MHz |
|
Mechanical |
|
Paddle Type: |
True rocker action |
|
Color: |
White installed; Optional Ivory, Black, Brown, Almond, or Gray with #2400xx kits |
|
Wire Nuts: |
4 included |
|
Mounting: |
Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent SwitchLinc Dimmer installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. |
|
Operating Conditions: |
Indoors, 32 to 104° F, up to 85% relative humidity |
|
Dimensions: |
4.1" H x 1.8" W x 1.2" D |
|
Weight: |
3.6 oz |
|
Electrical |
|
Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
|
Neutral Wire: |
Required |
|
Power Wire Leads: |
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) |
|
Maximum Amps: |
8 amps |
|
Ground Lead: |
6", 18 AWG, stranded, bare copper |
|
Load Types: |
Wired-in incandescent lighting devices |
|
Maximum Load: |
1000 Watts |
|
Power Consumption: |
0.56 Watts |
|
Certification: |
Safety tested for use in USA and Canada (ETL #3017581) |
|
X10 Features (applies to power line only) |
|
X10 Primary Address: |
1 optional (comes unassigned) |
|
X10 Scene Address: |
255 possible |
|
X10 Status Response: |
Supported |
|
X10 Resume Dim: |
Supported (by setting Local On-Level to zero) |
|
X10 Powerline Frequency: |
120 KHz |
|
X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
X10 Minimum Receive Level: |
20mV into 5 Ohms |
|
X10 Messages Repeated: |
No |
