KeypadLinc - INSTEON 6-touche du clavier de commande Scène avec interrupteur marche / arrêt (Dual-Band)

KeypadLinc - INSTEON 6-touche du clavier de commande Scène avec interrupteur marche / arrêt (Dual-Band)

En Stock
Modèle : Domo-2487S
Points de fidelité : 0
Description Avis (0)


Ce qui est inclus




Manufacturer Product No.: 2487S, KeypadLinc - INSTEON 6 Button Keypad Controller with On / Off Switch (Dual-Band), White
UPC: 813922011449
Patent No.: U.S. Patent No. 7,345,998, International patents pending
Warranty: 2 years, limited
LED Indicator One per button; LED reflects status of button or remote device(s)
Operation Modes INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order INSTEON, INSTEON cleanup, X10
Multi-Way Circuit Support One INSTEON 6 Button Keypad Controller with On/Off Switch controls load, Cross-Link any number of Keypad INSTEON device or other INSTEON Controllers
ON/OFF Button Pairs 1 Pair (6 button only)
Setup Memory Non-volatile EEPROM
Audio Alert Beeper, can be disabled
INSTEON Features
Max. # of Scene Memberships 8
Max. # of Controlled Scenes 8
INSTEON Links 417
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level 10 mV
INSTEON Messages Repeated Yes
Radio Frequency 915 MHz
Button Type 6 mechanical momentary contact type buttons
Button Appearance Solid white pre-printed plastic caps, with LED backlighting
Wire Nuts 4 included
Operating Conditions Indoors, 32 to 104° F, up to 85% relative humidity
Dimensions 4.2" H x 1.8" W x 1.7" D
Weight 5.2 oz
Supply Voltage 120 - 277 Volts AC, 60 Hertz, single phase
Power Wire Leads 6", 12 AWG (LINE and LOAD) & 18 AWG (NEUTRAL), stranded, 600V, 105° C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead 6", 12 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting and inductive loads
Neutral Wire Required
Maximum Load 20 Amps;1800 Watts (for incandescent loads)
Power Consumption: <1 Watt
Certification FCC, IC Canada, ETL
X10 Features (applies to power line only)
X10 Primary Address 1 optional (comes unassigned)
X10 Scene Addresses 255 possible
X10 Controllable Addresses 5 X10 address (one per button sent when pressed)
X10 Status Response Supported
X10 Powerline Frequency 121 KHz
X10 Minimum Transmit Level 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level 20 mVpp nominal
X10 Messages Repeated No


Écrire un avis

Votre nom :

Votre avis : Note : Le HTML n’est pas pris en charge !

Évaluation : Mauvais            Bon

Saisir le code ci-dessous :

Dernier posts


payment methods
Tous droits réservés © 2020 Domobec