Specifications
|
Manufacturer: |
Visonic |
Manufacturer Product No.: |
MCT-100 |
Frequency: |
315, 433.92 or other frequencies according
to local requirements |
Transmitter's ID Code: |
24-bit digital word, over 16 million
combinations, pulse width modulation |
Overall Message Length: |
36 bits |
Alarm Inputs: |
2, each with a separate 24-bit transmitter ID |
Input Circuit Type: |
N.C. / E.O.L., selected with on-board DIP
switch |
E.O.L. Resistor Required: |
47 kOhmO |
Message Repetition: |
Repetitive transmission (once every 3
minutes) or one-shot, as selected with on-board DIP switch |
Supervision: |
Signaling at 60-minute intervals or according to
local standards from input 1 (if enabled) or from input 2 (if input 1
is disabled) |
Response to Tamper Event: |
Tamper report every 3 minutes
(until the tamper switch is restored) |
Power Source: |
3.6 V battery, size 1/2 AA, Tadiran TL-5902 |
Current Consumption: |
5 µA standby, 8 mA in operation
(including LED) |
Battery Life Expectancy: |
3 years (for typical use) |
Battery Supervision: |
Automatic transmission of battery
condition data as part of any status report |
Operating Temperature: |
0°C to 49°C (32°F to 120°F) |
|
Dimensions: |
110 x 63 x 25 mm (4-5/16 x 2-1/2 x 1 in.) |
|
Weight: |
66.5 g (2.34 oz) |
|
Certifications: |
Meets FCC Part 15, MPT1349
and Directive 1999/5/EC |