|
Specifications
|
|
General |
|
Brand: |
INSTEON |
|
Manufacturer Product No.: |
2475S2, INSTEON In-LineLinc Relay (Non-Dimming) w/ Sense |
|
UPC: |
718122390618 |
|
Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
|
Warranty: |
2 years, limited |
|
Operation |
|
Operation Modes: |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
|
Combo Mode Message Order: |
INSTEON, INSTEON confirmations, X10 |
|
LED Indicator: |
Off when load is on and vice versa |
|
Sense Behavior: |
When 120V is applied to Sense wire, In-LineLinc turns on load and all linked INSTEON devices. Off when power is removed. |
|
Multi-Way Circuit Support: |
Yes, as a receiver and as a controller |
|
Setup Memory: |
Non-volatile EEPROM |
|
INSTEON Features |
|
INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
|
INSTEON Links: |
417 out of 16,777,216 possible |
|
INSTEON Powerline Frequency: |
131.65 KHz |
|
INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
INSTEON Minimum Receive Level: |
10 mV |
|
INSTEON Messages Repeated: |
Yes |
|
Mechanical |
|
Wire Nuts: |
6 included |
|
Mounting: |
Mounts in single or multiple-ganged junction box or fixture such as a ceiling fan. |
|
Operating Conditions: |
Indoors, 32 to 104°F, up to 85% relative humidity |
|
Dimensions: |
2.75" H x 1.75" W x 0.88" D |
|
Weight: |
2.9 ounces |
|
Electrical |
|
Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
|
Sense Voltage: |
120 Volts AC |
|
Power Wire Leads: |
6", 18 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), NEUTRAL (white), SENSE (yellow) |
|
Load Wire Leads: |
6", 14 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE 1 (red, paired w/ LINE), LINE 2 (red) |
|
Compatible Load Types: |
Wired-in incandescent lighting and inductive loads |
|
Ground Lead: |
6", 14 AWG, stranded, bare copper |
|
Load Types: |
Wired-in incandescent lighting and inductive loads |
|
Maximum Load: |
15 Amps; 480 Watts (for incandescent loads) |
|
Power Consumption: |
0.68 Watts |
|
Certification: |
Safety tested for use in USA and Canada (UL-507, CSA C22.22 #14-05) |
|
X10 Features |
|
X10 Primary Address: |
1 |
|
X10 Scene Addresses: |
1 |
|
X10 Status Response: |
Supported |
|
X10 Resume Dim: |
Supported (by setting Local On-Level to zero) |
|
X10 Powerline Frequency: |
120 KHz |
|
X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
X10 Minimum Receive Level: |
20mV into 5 Ohms |
|
X10 Messages Repeated: |
No |
