|
Specifications
|
|
General |
|
Brand: |
INSTEON |
|
Manufacturer Product No.: |
2486D, KeypadLinc - INSTEON 6 Button Keypad Controller with On / Off Switch |
|
UPC: |
White - 2486DWH6: 689076407847
Almond - 2486DAL6: 718122387311
Light Almond - 2486DLAL6: 813922011586
Black - 2486DBK6: 718122387519
Gray - 2486DGY6: 718122387915
Ivory - 2486DIV6: 718122388110
Brown - 2486DBR6: 718122387717 |
|
Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
|
Warranty: |
2 years, limited |
|
Operation |
|
LED Indicator |
One per button; LED reflects status of button or remote device(s) |
|
Operation Modes |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
|
Combo Mode Message Order |
INSTEON, INSTEON cleanup, X10 |
|
Multi-Way Circuit Support |
One INSTEON 6 Button Keypad Controller with On/Off Switch controls load, Cross-Link any number of Keypad INSTEON deviceor other INSTEON Controllers |
|
ON/OFF Button Pairs |
1 Pair (6 button only) |
|
Setup Memory |
Non-volatile EEPROM |
|
Audio Alert |
Beeper, can be disabled |
|
INSTEON Features |
|
INSTEON Addresses |
1 hard-coded out of 16,777,216 possible |
|
INSTEON Links |
417 |
|
INSTEON Powerline Frequency |
131.65 KHz |
|
INSTEON Minimum Transmit Level |
3.2 Vpp into 5 Ohms |
|
INSTEON Minimum Receive Level |
10 mV |
|
INSTEON Messages Repeated |
Yes |
|
Mechanical |
|
Button Type |
6 mechanical momentary contact type buttons |
|
Button Appearance |
Solid white pre-printed plastic caps, with LED backlighting |
|
Wire Nuts |
4 included |
|
Operating Conditions |
Indoors, 32 to 104°F, up to 85% relative humidity |
|
Dimensions |
4.1" H x 1.8" W x 1.2" D |
|
Weight |
3.6 oz |
|
Electrical |
|
Supply Voltage |
120 Volts AC +/- 10%, 60 Hertz, single phase |
|
Power Wire Leads |
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) |
|
Ground Lead |
6", 18 AWG, stranded, bare copper |
|
Load Types |
Wired-in incandescent lighting and inductive loads |
|
Neutral Wire |
Required |
|
Maximum Load |
13 Amps; 480 Watts (for incandescent loads) |
|
Power Consumption: |
0.72 Watts |
|
Certification |
Safety tested for use in USA and Canada (ETL #3017581) |
|
X10 Features |
|
X10 Primary Address |
1 optional (comes unassigned) |
|
X10 Scene Addresses |
255 possible |
|
X10 Controllable Addresses |
5 X10 address (one per button sent when pressed) |
|
X10 Status Response |
Supported |
|
X10 Powerline Frequency |
121 KHz |
|
X10 Minimum Transmit Level |
3.2 Vpp into 5 Ohms |
|
X10 Minimum Receive Level |
20 mVpp nominal |
|
X10 Messages Repeated |
No |
