|
Specifications
|
|
General |
|
Brand: |
INSTEON |
|
Manufacturer Product No.: |
2486D, KeypadLinc Dimmer - INSTEON 8-Button Scene Control Keypad with Dimmer |
|
UPC: |
White - 2486DWH8: 689076409049
Almond - 2486DAL8: 718122387410
Light Almond - 2486DLAL8: 813922011593
Black - 2486DBK8: 718122387618
Gray - 2486DGY8: 718122388011
Ivory - 2486DIV8: 718122388219
Brown - 2486DBR8: 718122387816 |
|
Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
|
Warranty: |
2 years, limited |
|
Operation |
|
On-Levels: |
32 locally, 1% increments with software |
|
Ramp Rates, (full-ON to full-OFF): |
0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely |
|
LED Indicator |
One per button; LED reflects status of button |
|
Operation Modes: |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
|
Combo Mode Message Order: |
INSTEON, INSTEON cleanup, X10 |
|
Multi-Way Circuit Support: |
One KeypadLinc Dimmer controls load, Cross-Link any number of KeypadLinc Dimmers or other INSTEON Controllers |
|
ON/OFF Button Pairs |
1 Pair (6 button only) |
|
Setup Memory: |
Non-volatile EEPROM |
|
INSTEON Features |
|
INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
|
INSTEON Links: |
417 |
|
INSTEON Powerline Frequency: |
131.65 KHz |
|
INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
INSTEON Minimum Receive Level: |
10 mV |
|
INSTEON Messages Repeated |
Yes |
|
Mechanical |
|
Button Type: |
8 mechanical momentary contact type buttons |
|
Button Appearance: |
Solid white pre-printed plastic caps, with LED backlighting |
|
Wire Nuts: |
4 included |
|
Mounting: |
Mounts in single or multiple-ganged junction box.Controls 200 watts less load for each immediately adjacent electronic dimmer installed. For example, 600 watt load capacity becomes 400 watt with another electronic dimmer installed to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating |
|
Operating Conditions: |
Indoors, 32 to 104°F, up to 85% relative humidity |
|
Dimensions: |
4.1" H x 1.8" W x 1.2" D |
|
Weight: |
3.6 oz |
|
Electrical |
|
Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
|
Power Wire Leads: |
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) |
|
Ground Lead: |
6", 18 AWG, stranded, bare copper |
|
Load Types: |
Wired-in incandescent lighting devices |
|
Neutral Wire |
Required |
|
Maximum Amps |
5-amps |
|
Maximum Load: |
600 Watts (uses 12-Amp triac dimmer) |
|
Power Consumption: |
0.88 Watts |
|
Certification: |
Safety tested for use in USA and Canada (ETL) |
|
X10 Features |
|
X10 Primary Address: |
1 optional (comes unassigned) |
|
X10 Scene Addresses: |
255 possible |
|
X10 Controllable Addresses |
5 X10 address (one per button sent when pressed) |
|
X10 Status Response: |
Supported |
|
X10 Resume Dim: |
Supported (by setting Local On-Level to zero) |
|
X10 Powerline Frequency: |
120 KHz |
|
X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
X10 Minimum Receive Level: |
20 mVpp nominal |
|
X10 Messages Repeated: |
No |
