|
General |
|
Brand: |
INSTEON |
|
Manufacturer product no.: |
2477S - SwitchLinc On/Off - INSTEON Remote Control On/Off Switch (Dual-Band) |
|
UPC: |
White - 2477S: 813922012378
Almond - 2477SAL: 813922013245
Light Almond - 2477SLAL: 813922013290
Black - 2477SBK: 813922013252
Gray - 2477SGY: 813922013276
Ivory - 2477SIV: 813922013283
Brown - 2477SBR: 813922013269 |
|
FCC ID: |
SBP2477S |
|
Patent no.: |
U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see www.insteon.com). |
|
Warranty: |
2 years, limited |
|
Operation |
|
LED indicator: |
8 white LEDs. Optional green, blue, amber or red LEDs with #2400L kit. |
|
Operation modes: |
INSTEON only, X10 only, INSTEON and X10 combo mode |
|
Combo mode message order: |
INSTEON, INSTEON cleanup, X10 |
|
Multi-way circuit support: |
One SwitchLinc Relay controls load, cross-link any number of SwitchLincs or other INSTEON Controllers |
|
Setup memory: |
Non-volatile EEPROM |
|
INSTEON Features |
|
INSTEON addresses: |
1 |
|
INSTEON |
400 responder groups and 1 controller group |
|
Maximum scene memberships |
400 (combined controller + responder) |
|
Scene commands supported as controller |
On |
Off |
|
Fast-on |
Fast-off |
|
Begin brighten |
End brighten |
|
Begin dim |
End dim |
|
Scene commands supported as responder |
On |
Off |
|
Fast-on |
Fast-off |
|
Software configurable |
Yes |
|
INSTEON powerline frequency: |
131.65 KHz |
|
INSTEON minimum transmit level: |
3.2 Vpp into 5 Ohms |
|
INSTEON minimum receive level: |
10 mV |
|
INSTEON messages repeated: |
Yes |
|
Radio frequency: |
915 MHz |
|
RF Range |
>100' (open air) |
|
Mechanical |
|
Paddle Type: |
True rocker action |
|
Wire Nuts: |
4 included |
|
Wires |
Line (Hot) - black, 12 AWG |
|
Neutral - white, 18 AWG |
|
Load - red, 12 AWG |
|
Ground - bare copper, 12 AWG |
|
Mounting: |
Standard, single-gang wall box |
|
Color: |
White (color change kits available) |
|
Set button: |
Clear |
|
Air gap: |
Set button when pulled out |
|
Plastic: |
UV stabilized polycarbonate |
|
Beeper: |
Yes |
|
Setup LED: |
1 red/green dual-color |
|
Status LEDs: |
2 white, can be dimmed or disabled (color change kits available) |
|
Operating conditions: |
Indoors, 32-104°F, up to 85% relative humidity |
|
Dimensions: |
4.1" H x 1.78" W x 1.47" D |
|
Weight: |
4.2 oz |
|
Electrical |
|
Supply voltage: |
100-277VAC +/- 10%, 50/60Hz auto-detected at power-up |
|
Neutral wire: |
Required |
|
Power wire leads: |
6", 12 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, Line (black), Load (red), 18 AWG Neutral (white) |
|
Maximum load: |
17 Amp resistive capacity (100-277 VAC) |
|
1,800 Watt incandescent capacity (100-277 VAC) |
|
1 HP motors (at 120 VAC only) |
|
10 Amps ballast |
|
Surge resistance: |
Up to 500 VAC |
|
Retains all settings without power: |
Yes, saved in non-volatile EEPROM |
|
Standby power consumption: |
<1 Watt |
