Ce qui est inclus
|
Specifications |
|
| Visonic Product No.: | SecureLinc Care 1 w/MCT201WP |
| Dimensions: | 10 13/16" x 8" x 2 1/8" (275mm x 203mm x 55mm) |
| Weight: | 2.2 pounds (990g) without batteries |
| Zones: | 28 wireless, 2 hardwired |
| Hardwired Zone Requirements: | 2.2 k. E.O.L. resistance (max. resistance of wires 220) |
| Zone Types: | Interior follower, perimeter, perimeter follower, delay 1, delay 2, 24h silent, 24h audible, fire, non-alarm, emergency, gas and flood |
| User Codes: | 8 codes, 4 digits each |
| Control Facilities: | Integral keypad, PowerCode hand-held transmitters, wireless commander, MCM-140+, remote telephone, local or remote computer |
| Display: | Single line, back lighted 16-character LCD and 4 LED indicators |
| Arming Modes: | AWAY, HOME, AWAY-INSTANT, HOMEINSTANT, LATCHKEY, FORCED, BYPASS |
| Alarm Types: | Silent alarm, siren alarm or sounder (internal) alarm, in accordance with zone attributes |
| Siren Signals: | Continuous (intrusion / 24 hours / panic); triple pulse - pause - triple pulse (fire) |
| Siren Timeout: | Programmable (4 min. by default) |
| Internal Sounder Output: | At least 85 dBA at 10 ft. (3m) |
| Supervision: | Programmable time frame for inactivity alert |
| Data Retrieval: | Status, alarm memory, trouble, event log |
| Operating Frequencies: | 315 MHz (in USA & Canada) or other UHF channels per local requirement in the country of use |
| Receiver Type: | Super-heterodyne, fixed frequency |
| Receiver Range: | 600 ft. (180m) in open space |
| Antenna Type: | Spatial diversity |
| Coding: | PowerCode and/or CodeSecure™ |
| Power Supply: | Plug-in transformer 120 VAC, 60 Hz / 9 VAC, 1A (in the U.S.A.); 230 VAC, 50 Hz / 9 VAC, 1A |
| Current Drain: | Approx. 65 mA standby, 800 mA at full load and in alarm |
| Site External Siren Current (EXT): | 450 mA max @ 10.5 VDC when powered by AC & DC (battery) |
| Site Internal Siren Current (INT): | 450 mA max. @ 10.5 VDC when powered by AC & DC (battery) |
| PGM Output Current: | 100 mA max. |
| Detector 1 & 2 Total (Sum) Current: | 100 mA max. |
| High Current / Short Circuit Protection: | All outputs are protected (current limited) |
| Battery Test: | Once every 10 seconds |
| Built-in Modem: | 300 baud, Bell 103 protocol |
| Data Transfer to Local Computer: | Via RS232 serial port |
| Report Destinations: | 2 central stations, 4 private telephones, 1 pager |
| Reporting Format Options: | SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2 1800/2300 Hz, Contact ID, Scancom |
| Pulse Rate: | 10, 20, 33 and 40 pps - programmable |
| Message to Private Phones: | Tone or voice |
| Message to Pager: | PIN No. Alarm Type, Zone No. |
| Operating Temperature Range: | 32°F to 120°F (0°C to 49°C) |
| Storage Temperature Range: | -4°F to 140°F (-20°C to 60°C) |
| Humidity: | 85% relative humidity, @ 30°C (86°F) |
| Approvals: | FCC compliant |
| Warranty: | 1 year, limited |
|
Pendant Transmitter |
|
| Visonic Product No.: | MCT 201WP |
| UPC: | 780245227201 |
| Dimensions: | 2 3/8" x 1 9/16" x 23/32" (40mm x 61mm x 18mm) |
| Weight: | 0.7 oz. (22g) |
| Frequency: | 315 MHz, 433.92 MHz or other, depending on local requirements |
| Encoding: | 240bit digital word, over 16 million combinations |
| Transmission Duration: | As long as button is pressed |
| Power Supply: | 12-volt alkaline battery |
| Operating Temperature: | 32° F to 120° F (0° C to 49° C) |
| Approvals: | FCC compliant |
| Warranty: | 1 year, limited |
