|
General |
|
Brand: |
INSTEON |
|
Manufacturer product no.: |
2475DA1, In-LineLinc Dimmer - INSTEON Remote Control In-Line Dimmer Switch (Dual-Band) |
|
UPC: |
813922012361 |
|
FCC ID: |
SBP2475DA1 |
|
Patent No.: |
U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see www.insteon.com). |
|
Warranty: |
2 years, limited |
|
Operation |
|
On-levels: |
32 locally, increments of 1% with software |
|
Ramp rates (full-on to full-off): |
0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely |
|
Operation modes: |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
|
Combo mode message order: |
INSTEON, INSTEON confirmations, X10 |
|
LED indicator: |
Off when load is on and vice versa |
|
Multi-way circuit support: |
Yes, as a receiver and as a controller |
|
Setup memory: |
Non-volatile EEPROM |
|
INSTEON Features |
|
INSTEON ID: |
1 |
|
INSTEON: |
400 responder groups and 1 controller group |
|
Maximum scene memberships: |
400 (combined controller and responder) |
|
Scene commands supported as responder: |
On |
Off |
|
Fast-on |
Fast-off |
|
Brighten |
Dim |
|
Software configurable: |
Yes |
|
RF Range: |
100' open air |
|
Mechanical |
|
Mounting: |
Mounts inside standard electrical box in the ceiling or in the wall |
|
Wires: |
White - Neutral 18 gauge
Black - Hot 16 gauge
Red - Load 16 gauge
Copper - Earth ground 14 gauge
|
|
Beeper: |
Yes |
|
Operating conditions: |
Indoors, 32-104°F, up to 90% relative humidity |
|
Dimensions: |
2.75" H x 1.75" W x 1" D |
|
Weight: |
2.5 oz |
|
Storage conditions: |
4-158°F (-20-70°C) |
|
Electrical |
|
Voltage: |
100-277VAC +/- 10%, Single phase |
|
Frequency: |
50/60Hz auto-detected at power-up |
|
Load types: |
Wired-in incandescent lighting |
|
Maximum load: |
400 Watts |
|
Retains all settings without power |
Yes, saved in non-volatile EEPROM |
|
Standby power consumption: |
<1 Watt |
|
Safety approved: |
ETL (Intertek Testing Services) |
|
Certification: |
FCC, IC Canada |
|
X10 Features (applies to powerline only) |
|
X10 primary address: |
1 (comes unassigned) |
|
X10 status response: |
Supported |
|
X10 powerline frequency: |
120 KHz |
|
X10 messages repeated: |
No |