|
Specifications
|
|
General |
|
Brand: |
INSTEON |
|
Manufacturer Product No.: |
2466SW, INSTEON ToggleLinc Relay (Non-Dimming), White |
|
UPC: |
White - 2466SW: 891114000556
Ivory - 2466SI: 689076402644 |
|
Patent No.: |
U.S. Patent No. 7,345,998, International patents pending |
|
Color: |
White |
|
Warranty: |
2 years, limited |
|
Operation |
|
LED Indicator: |
Off when load is on and vice versa |
|
Operation Modes: |
INSTEON only, X10 only, INSTEON and X10 Combo Mode |
|
Combo Mode Message Order: |
INSTEON, X10, INSTEON cleanup |
|
Multi-Way Circuit Support: |
One ToggleLinc Dimmer controls load, Cross-Link any number of ToggleLinc Relays or other INSTEON Controllers |
|
Setup Memory: |
Non-volatile EEPROM |
|
INSTEON Features |
|
INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
|
INSTEON Links: |
417 |
|
INSTEON Powerline Frequency: |
131.65 KHz |
|
INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
INSTEON Minimum Receive Level: |
10 mV |
|
INSTEON Messages Repeated: |
Yes |
|
Mechanical |
|
Paddle Type: |
Toggle |
|
Wire Nuts: |
3 included |
|
Mounting: |
Mounts in single or multiple-ganged junction box. |
|
Operating Conditions: |
Indoors, 32° to 104°F, up to 85% relative humidity |
|
Dimensions: |
1.73"w x 4.14"h x 1.73"d (front bracket)
1.74"w x 2.71"h x 1.40"d (main body) |
|
Weight: |
3.6 oz |
|
Electrical |
|
Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
|
Power Wire Leads: |
6", 14 AWG (black and red) and 18 AWG (for white), stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) |
|
Ground Lead: |
6", 14 AWG, stranded, bare copper |
|
Load Types: |
Wired-in incandescent lighting and inductive loads |
|
Maximum Load: |
15 Amps; 480 Watts (for incandescent loads) |
|
Power Consumption: |
0.67 Watts |
|
Certification: |
Safety tested for use in USA and Canada (ETL #3017581) |
|
X10 Features |
|
X10 Primary Address: |
1 optional (comes unassigned) |
|
X10 Controllable Addresses: |
1 same address as primary address |
|
X10 Status Response: |
Supported |
|
X10 Powerline Frequency: |
120 KHz |
|
X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
|
X10 Minimum Receive Level: |
20mV into 5 Ohms |
|
X10 Messages Repeated: |
No |
